The large CNC processing center is very complicated in the processing process. Because the processing process and operation of the processing center of the CNC processing center have strict safety operating procedures. Others about the booting processing of the CNC lathe processing center have rules. In these localities The operator's operational error may be inappropriate and the result is very serious, so we must take a closer look.

        It is necessary to abide by the safety operation regulations of the processing center

        You should wear protective supplies and cuffs in accordance with the rules before work. You are not allowed to wear scarves, gloves, ties, and apron.

        Check whether the tool compensation, the zero point of the machine, the zero of the workpiece, etc. before booting whether the computer gong processing is correct. The relative position of each button should meet the operating requirements. Early compile and enter CNC programs.

        It is necessary to check the working conditions of the protection, stability, signal, location, mechanical transmission part, electrical, hydraulic, and number display systems on the equipment, and cutting can be performed under all normal circumstances.

        For trial work before processing, you should check the working conditions of smooth, mechanical, electrical, hydraulic, and number display systems. Dongguan computer gong processing can be carried out under all normal circumstances.

        After the machine tool enters the processing work, the operator is not allowed to touch the movement of the motor workpiece, tools and transmission parts, and prohibit the transmission part of the machine tool to pass or get things.

        When adjusting the machine tool, clipper workpiece and tool, and wiping machine, it is necessary to park it. West or other items should not be placed on the electrical, operating cabinet and protective cover.